If your staple gun jams, the Important first step is to disconnect the unit from the power supply.
Open the magazine and remove the staples making sure that the staple, that has stalled the mechanism, is removed.
Reload the unit and close the Magazine.
Now reconnect to a power supply and retest on a sample material to make sure the jam has been cleared.
If the Unit continues to jam please check the following
- Is the material being used to hard for the power of the stapler
- Are the correct specification staples being used
If you are still experiencing problems with the Staple Gun please contact us using the details below. Please include the model number of your product.
Stanley Black & Decker
270 Bath Road
Telephone: 01753 511234
To send us an online query, you can complete the form found by clicking the ‘Contact Us’ link on the bottom of the page