Firstly check to see if the chuck is secured with a screw, if you have a screw follow steps 1-3. If the chuck is not secured with a screw just follow steps 2-3.
Step 1: Screw will have a left-hand thread and must be turned clockwise to undo it.
Step 2: Once the screw has been removed place a suitable Allen Key in the chuck and tighten the jaws.
Step 3: You should then tap the end of the Allen Key to ease the chuck off (the chuck has a conventional thread so unscrew it in an anti-clockwise direction).
If the chuck is stuck or locked and will not move or unscrew out of a locked and fully open position, please take the tool to your nearest Authorise Agent - you can find your closest Service Centre here if you are based in the UK, or here if you are located in Ireland. Some of our high spec cordless drills will need to be taken to your nearest Service Centre to have a new chuck fitted.
Have more questions? Submit a request
Comments
1 comment
What's the size and type of the screwhead in the Stanley fatmax drill chuck. I need to replace the chuck but it looks like a special screw.
Please sign in to leave a comment.