Support

Please contact our customer service team with details of the parts that are missing and your full address. Please attach details of your proof of purchase.To write to us:Address:Stanley Black & Dec...

First you need to connect the Smart Cable to the Booster, and the LED should flash green as shown in the images below. If it does not flash, there is a fault.   If you face any issues with any of...

You should refer to specific retailers guidelines however if the merchandise is returned in original packaging you should be offered a full refund or exchange.

Lead Acid batteries should always be stored fully charged, Nickel Cadmium and Nickel Metal Hydride are best stored fully charged. You should regularly charge and discharge all the above batteries t...

Add a little oil on the sharpening stone. Place the blade on the surface of the stone; you should feel where the grinding angle sits on the stone. Then lift the blade up 5 degrees.      Move the b...

The accuracy specifications for these levels are shown below:   Product Family Pin No. Primary Utile Surface Secondary Utile Surface Specific Notes Stanley Basic I-Beam Level STHT...

The maximum angular derivation is   +/- .10° The deviation in the calibration report reported below is .05°, which is well within that +/- .10° specification.  

The current you read on the ammeter is supplied to the battery by the charger. If you have connected it with an empty battery, it will deliver its maximum output, example 4 A. When charging, it bec...

Most batteries need to be charged at least a few times a year. This process must be done before winter if you live in a cold climate. If not, it may be too late before you find out that the battery...

Yes! It is important that the car and motorcycle have a 12-volt electrical system and that the battery has an amperage that is compatible with that of the charger.