Support

TIG (Tungsten Inert Gas) welding uses the heat generated by an arcelectric that strikes between the piece to be welded and an infusible tungsten electrode,under the protection of an inert gas, comm...

Below is a table of values ​​for welding: Material up to 1.5 mm from 40 to 60 Ampere with 1.6 mm electrode Material from 2 to 3 mm from 60 to 70 Ampere with 2 mm electrode Material from 2 to 5 mm f...

MMA (Manual Metal Arc) coated electrode welding uses heatgenerated by an arc that arises between the electrode and the piece to be welded.It is probably the most widely used technology in the world...

The absence of the gas cylinder in the welding circuit, together with the use of cored electrode wires, identifies the welding process without gas protection (SELF SHIELDED WIRE, NO GAS or FLUX); i...

The terms "MIG" and "MAG" identify two types of continuous wire arc welding that are very similar to each other. More precisely, it is a technique that can be put applied in two slightly different ...

The multi-process welder or multifunctional welder is an all-in-one machine! These generators can combine MMA coated electrode welding, TIG, MIG MAG and cored wire (no gas).

We produce three types: Manual electrode welding machine (MMA, or "Manual metallic arc")Continuous wire welding machine with gas protection and without gas (MIG / MAG / MOG. The abbreviation MAG st...

Yes, it is possible, it is important that it is stabilized and with a power compared to the welding machine at least 1.5 times higher

In both areas. Certainly the welding machine is a more professional tool than an hobbystic one, as those who practice some professions that involve metalworking (such as the bodyworker, the blacksm...

As can be easily guessed from its name, the welding machine is a tool that is used to weld, or to make the junction of two metal components originally separated . When they are welded together, the...